日本岩崎IWATSU 高压探头HV-P60 HV-P30

●产品简介：

能够测量60KV/30KV 的高压探头

●HV-P60

 HV-P60

High-voltage waveforms of up to DC 60 kV, pulse 80 kV measured by oscilloscope

Wide bandwidth, DC to 50 MHz

Maintenance-free, due to use of silicon rubber - guarantees stable withstand voltage

SpecificationsMaximum input voltageDC 60 kV or AC peak*
Single-shot pulse of 80 kV, standard pulse waveBandwidthDC to 50 MHz, within -3 dBRise time7 ns or less (for probes only)Input RC1000 MW ±5% //5 pF ±2 pFAttenuation2000:1 ±5%Cable lengthApprox. 4 mConnectorBNC typeUsed forOscilloscope with input RC: 1 MW, 15 to 50 pFSizeApprox. 88 mm (ø) x 338 mm (L)WeightApprox. 3.5 kg (including accessories)AccessoriesMatching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bagOptions
High-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30).

* The P-P voltage drops if the CW is 100 kHz or greater.

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 60 kV, and the attenuation is 2000:1.

Characteristic curve

                       Frequency（Sine Wave）     

              Maximum Input Voltage and Frequency (Sine Wave) [HV-P60]

●HV-P30

HV-P30
High-voltage probe stand SK-301 (sold separately)

High-voltage waveforms of up to DC 30 kV, pulse 40 kV measured by oscilloscope

SpecificationsMaximum input voltageDC 30 kV or DC + AC peak*
Single-shot pulse of 40 kV, repetitive signalBandwidthDC to 50 MHz, within -3dBRise time7 ns or less (for probes only)Input RC100 MW ±5% //7 pF or lessAttenuation1000:1 ±5%Cable lengthApprox. 3 mConnectorBNC typeUsed forOscilloscope with input RC: 1 MW, 15 to 50 pFSizeApprox. 66 mm (ø) x 315 mm (L)WeightApprox. 3 kg (including accessories)AccessoriesMatching box, clamp, probe tip, ground lead, adjusting screwdriver, accessory bagOptionsHigh-voltage probe stand SK-301 (produced upon order)
The SK-301 can be used with both the HV-P60 and the HV-P30. It is attached by turning the probe bracket upside down (for HV-P60/HV-P30).

This is a passive probe that measures high-voltage waveforms by connecting to an oscilloscope, and has the following characteristics: the bandwidth is DC to 50 MHz, the maximum input is DC 30 kV, and the attenuation is 1000:1.

Characteristic curve

 Frequency（Sine Wave）     

 Maximum Input Voltage and Frequency (Sine Wave) [HV-P30]

更多产品详情请登录长沙力高捷创仪器有限公司（www.probemart.com/www.jectronic.com）或联系我们！